Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457445

Courtesy of KIA MOTORS AMERICA, INC.

G13457446

Courtesy of KIA MOTORS AMERICA, INC.

G13457447

Courtesy of KIA MOTORS AMERICA, INC.

G13457448

Courtesy of KIA MOTORS AMERICA, INC.

G13457449

Courtesy of KIA MOTORS AMERICA, INC.

G13457450

Courtesy of KIA MOTORS AMERICA, INC.

G13457451

Courtesy of KIA MOTORS AMERICA, INC.

G13457452

Courtesy of KIA MOTORS AMERICA, INC.

G13457453

Courtesy of KIA MOTORS AMERICA, INC.

G13457454

Courtesy of KIA MOTORS AMERICA, INC.

G13457455

Courtesy of KIA MOTORS AMERICA, INC.

G13457456

Courtesy of KIA MOTORS AMERICA, INC.