Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457269

Courtesy of KIA MOTORS AMERICA, INC.

G13457270

Courtesy of KIA MOTORS AMERICA, INC.

G13457271

Courtesy of KIA MOTORS AMERICA, INC.

G13457272

Courtesy of KIA MOTORS AMERICA, INC.

G13457273

Courtesy of KIA MOTORS AMERICA, INC.

G13457274

Courtesy of KIA MOTORS AMERICA, INC.

G13457275

Courtesy of KIA MOTORS AMERICA, INC.

G13457276

Courtesy of KIA MOTORS AMERICA, INC.

G13457277

Courtesy of KIA MOTORS AMERICA, INC.

G13457278

Courtesy of KIA MOTORS AMERICA, INC.

G13457279

Courtesy of KIA MOTORS AMERICA, INC.

G13457280

Courtesy of KIA MOTORS AMERICA, INC.