DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Faulty NAVI Open or short in C-CAN communication line
Enable Condition	Ready (Ready signal received more than 2s) CAN communication line in normal condition Auxiliary battery voltage is between 9V and 16V Operating SCC (FCA) AVN is not updating, NAVI is functioning normally
Threshold Value	When it received abnormal invalid signal message from NAVI
Diagnosis Time	0.5s
Fail Safe	SCC (FCA) Disengagement/Shutdown SCC (FCA) Warning lamp turns ON