LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Niro Touring >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Autonomous Emergency Braking (AEB) System Diagnosis (HEV) >> DTC C1817-82: CAN Signal Error Gateway >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

G13457701Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "ON".
SCC (FCA) connector 8 (C-CAN high) Chassis ground - Fig.1
SCC (FCA) connector 7 (C-CAN low) Chassis ground -
  1. Ignition "OFF".
  2. Disconnect auxiliary battery (-) cable.
  3. Disconnect the electrical connector(s) from the concerned component.
SCC (FCA) connector 8 (C-CAN high) Chassis ground - ∞ (infinity)Ω
SCC (FCA) connector 7 (C-CAN low) Chassis ground - ∞ (infinity)Ω
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
SCC (FCA) connector 8 (C-CAN high) IGPM connector 4 (C-CAN high) Approx. below 1Ω
SCC (FCA) connector 7 (C-CAN low) IGPM connector 3 (C-CAN low) Approx. below 1Ω
G13457702Courtesy of KIA MOTORS AMERICA, INC.

Good 

No Good