Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457687

Courtesy of KIA MOTORS AMERICA, INC.

G13457688

Courtesy of KIA MOTORS AMERICA, INC.

G13457689

Courtesy of KIA MOTORS AMERICA, INC.

G13457690

Courtesy of KIA MOTORS AMERICA, INC.

G13457691

Courtesy of KIA MOTORS AMERICA, INC.

G13457692

Courtesy of KIA MOTORS AMERICA, INC.

G13457693

Courtesy of KIA MOTORS AMERICA, INC.

G13457694

Courtesy of KIA MOTORS AMERICA, INC.

G13457695

Courtesy of KIA MOTORS AMERICA, INC.

G13457696

Courtesy of KIA MOTORS AMERICA, INC.

G13457697

Courtesy of KIA MOTORS AMERICA, INC.

G13457698

Courtesy of KIA MOTORS AMERICA, INC.