Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457623

Courtesy of KIA MOTORS AMERICA, INC.

G13457624

Courtesy of KIA MOTORS AMERICA, INC.

G13457625

Courtesy of KIA MOTORS AMERICA, INC.

G13457626

Courtesy of KIA MOTORS AMERICA, INC.

G13457627

Courtesy of KIA MOTORS AMERICA, INC.

G13457628

Courtesy of KIA MOTORS AMERICA, INC.

G13457629

Courtesy of KIA MOTORS AMERICA, INC.

G13457630

Courtesy of KIA MOTORS AMERICA, INC.

G13457631

Courtesy of KIA MOTORS AMERICA, INC.

G13457632

Courtesy of KIA MOTORS AMERICA, INC.

G13457633

Courtesy of KIA MOTORS AMERICA, INC.

G13457634

Courtesy of KIA MOTORS AMERICA, INC.