Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457607

Courtesy of KIA MOTORS AMERICA, INC.

G13457608

Courtesy of KIA MOTORS AMERICA, INC.

G13457609

Courtesy of KIA MOTORS AMERICA, INC.

G13457610

Courtesy of KIA MOTORS AMERICA, INC.

G13457611

Courtesy of KIA MOTORS AMERICA, INC.

G13457612

Courtesy of KIA MOTORS AMERICA, INC.

G13457613

Courtesy of KIA MOTORS AMERICA, INC.

G13457614

Courtesy of KIA MOTORS AMERICA, INC.

G13457615

Courtesy of KIA MOTORS AMERICA, INC.

G13457616

Courtesy of KIA MOTORS AMERICA, INC.

G13457617

Courtesy of KIA MOTORS AMERICA, INC.

G13457618

Courtesy of KIA MOTORS AMERICA, INC.