Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457541

Courtesy of KIA MOTORS AMERICA, INC.

G13457542

Courtesy of KIA MOTORS AMERICA, INC.

G13457543

Courtesy of KIA MOTORS AMERICA, INC.

G13457544

Courtesy of KIA MOTORS AMERICA, INC.

G13457545

Courtesy of KIA MOTORS AMERICA, INC.

G13457546

Courtesy of KIA MOTORS AMERICA, INC.

G13457547

Courtesy of KIA MOTORS AMERICA, INC.

G13457548

Courtesy of KIA MOTORS AMERICA, INC.

G13457549

Courtesy of KIA MOTORS AMERICA, INC.

G13457550

Courtesy of KIA MOTORS AMERICA, INC.

G13457551

Courtesy of KIA MOTORS AMERICA, INC.

G13457552

Courtesy of KIA MOTORS AMERICA, INC.