Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457285

Courtesy of KIA MOTORS AMERICA, INC.

G13457286

Courtesy of KIA MOTORS AMERICA, INC.

G13457287

Courtesy of KIA MOTORS AMERICA, INC.

G13457288

Courtesy of KIA MOTORS AMERICA, INC.

G13457289

Courtesy of KIA MOTORS AMERICA, INC.

G13457290

Courtesy of KIA MOTORS AMERICA, INC.

G13457291

Courtesy of KIA MOTORS AMERICA, INC.

G13457292

Courtesy of KIA MOTORS AMERICA, INC.

G13457293

Courtesy of KIA MOTORS AMERICA, INC.

G13457294

Courtesy of KIA MOTORS AMERICA, INC.

G13457295

Courtesy of KIA MOTORS AMERICA, INC.

G13457296

Courtesy of KIA MOTORS AMERICA, INC.