DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Signal monitoring	Poor connector connection Open or short to ground in circuit of valve Abnormal solenoid valve operation Faulty IBAU
Threshold Value	Case1	Valve relay "ON"/Solenoid valve "OFF" ABS valve: Voltage of vale is less than 2.0V for 0.06s AHB valve: Voltage difference in relay and valve is over 5V for 1s Valve relay "ON"/Solenoid valve "ON" AHB valve: Target current of valve is more than 1A for 1s and actual current is less than 20% of target current
Threshold Value	Case2	Valve relay "ON"/Solenoid valve "ON" ABS valve: Current of valve is over 8.25A for 0.06s AHB valve: Voltage difference in valve relay and AHB valve is less than 2V for 1s
Warning Lamp		EBD/ABS/ESC (ESP)/AVH Warning Indicator Lamp "ON" Buzzer "ON" and AHB inhibited when the AHB valve is malfunction EBD inhibited when the ABS valve is malfunction
Disable Condition		Ignition "OFF" and then "ON"