| DTC Strategy |
- Pedal Stroke (PS) pressure monitoring
|
- Air bleeding is not performed correctly
- Pedal stroke pressure sensor faulty
- Brake fluid leaks
|
| Enable Condition |
|
| Threshold Value |
- A failure is detected if PSP pressure is in discordance with brake pedal travel and control target pressure while hydraulic boosting is activated
- A failure is detected if PSP pressure is more than 15bar higher than BCP1 and BCP2while hydraulic boosting is inactivated
- PSP is changed over 30bar more than 100 times for 2s
|
| Warning Lamp |
- EBD/ABS/ESC (ESP)/AVH warning indicator lamp "ON" and Buzzer is ON
|
| Disable Condition |
- Ignition "OFF"/"ON" and Brake Pressed and Released for more than 3s
|