DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal monitoring	Poor connector connection Open or short in signal circuit of front-RH wheel speed sensor Faulty wheel speed sensor front-RH
Enable Condition	Ignition "ON"
Threshold Value	Sensor signal current is out of normal range for 0.14s * Specification: 4 to 60 mA (±10%)
Warning Lamp	In case of failure on more than two wheels EBD/RBS/ABS/ESC (ESP)/DBC/AVH Warning Indicator Lamp "ON" (Inhibits EBD) In case of failure on all wheels AHB/EBD/RBS/ABS/ESC (ESP)/DBC/AVH Warning Indicator Lamp "ON"
Disable Condition	Ignition "OFF" and then "ON"