Repair Procedures: Replacement

Information 

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

1. Open the fuel filler door and then filler door cap.
2. Remove the fuel filler door packing (A) after loosening the mounting bolts.

   Courtesy of KIA MOTORS AMERICA, INC.

3. Remove the fuel filler door release actuator fixed pin (A).

   Courtesy of KIA MOTORS AMERICA, INC.

4. Remove the fuel filler door housing (A).

   Courtesy of KIA MOTORS AMERICA, INC.

5. Install in the reverse order of removal.

   Information 

   • Make sure the fuel filler door locks/unlocks and opens/closes properly.
   • Replace any damaged clips.