DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN message monitoring	Poor connector connection Short or open in C-CAN line between IBAU and FCA unit Faulty FCA unit
Enable Condition	Ignition "ON"
Threshold Value	In case that FCA message was not received for more than specific time * Specific time control in progress: 500 ms no control: 1500 ms In case that FCA message did not increase for specific times continuously * Specific time control in progress: 10 times no control: 30 times
Warning Lamp	-
Disable Condition	Ignition "OFF" and then "ON"