DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage Monitoring	Poor connector connection Open or short in circuit of brake pedal travel sensor Brake pedal travel sensor faulty
Enable Condition	Ignition "ON"
Threshold Value	A failure is detected if PDT or PDF voltage is out of the normal range longer than 1s * Voltage of normal range PDT: 0.2V to 4.8V PDF: 0.1V to 2.4V
Warning Lamp	Brake (EBD) warning indicator lamp "ON" When both PDT and PDF sensor are failed, ESC (ESP) warning indicator lamp "ON"
Disable Condition	Ignition "OFF" and then "ON"