| DTC Strategy |
- Pressure sensor offset Monitoring
|
- Poor connector connection
- Electrical noise signal
- Abnormal off-set of pressure sensor
- Faulty master pressure sensor
- Faulty IBAU
|
| Enable Condition |
|
| Threshold Value |
- A failure is detected if HPA pressure is in discordance with other pressure sensors and control target pressure
- HPA is changed over 30bar more than 100 times for 2s
|
| Warning Lamp |
- Brake (EBD), ABS, ESC, AVH warning indicator lamp "ON"
- Buzzer "ON"
|
| Disable Condition |
- Ignition "OFF"/"ON" and Brake Pressed and Released for more than 3s
|