DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage monitoring	Poor connector connection Open or short in master pressure sensor circuit Faulty IBAU
Enable Condition	Ignition "ON"
Threshold Value	Output voltage of pressure sensors (PRS1, PRS2) are less than 0.2 (±0.1) V or greater than 4.8 (±0.1) V for more than 1s Pressure sensors output voltage average value is out range of 2.5V for more than 1s
Warning Lamp	Brake (EBD), ABS, ESC, AVH warning indicator lamp "ON" Buzzer "ON"
Disable Condition	Ignition "OFF" and then "ON"