| DTC Strategy |
|
- Poor connector connection
- Faulty CAN communication circuit
- Faulty VCU
- Faulty HCU
- Faulty ECM
|
| Threshold Value |
- The HCU1 or HCU3 message is not received during 500 ms or HCU5 message is not received during 5s
- The invalid HCU1 or HCU3 message is received during 500 ms
- The invalid VCU1 or VCU3 message is received during 500 ms or invalid VCU5 message is received during 2s
- The fault is not checked during 2s after the ignition turns on
- The fault is not checked if the CAN bus off fault is detected
|
| Warning Lamp |
|
| Clear Condition |
- Ignition "OFF" and then "ON"
|