Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457738

Courtesy of KIA MOTORS AMERICA, INC.

G13457739

Courtesy of KIA MOTORS AMERICA, INC.

G13457740

Courtesy of KIA MOTORS AMERICA, INC.

G13457741

Courtesy of KIA MOTORS AMERICA, INC.

G13457742

Courtesy of KIA MOTORS AMERICA, INC.

G13457743

Courtesy of KIA MOTORS AMERICA, INC.

G13457744

Courtesy of KIA MOTORS AMERICA, INC.

G13457745

Courtesy of KIA MOTORS AMERICA, INC.

G13457746

Courtesy of KIA MOTORS AMERICA, INC.

G13457747

Courtesy of KIA MOTORS AMERICA, INC.

G13457748

Courtesy of KIA MOTORS AMERICA, INC.

G13457749

Courtesy of KIA MOTORS AMERICA, INC.