Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457415

Courtesy of KIA MOTORS AMERICA, INC.

G13457416

Courtesy of KIA MOTORS AMERICA, INC.

G13457417

Courtesy of KIA MOTORS AMERICA, INC.

G13457418

Courtesy of KIA MOTORS AMERICA, INC.

G13457419

Courtesy of KIA MOTORS AMERICA, INC.

G13457420

Courtesy of KIA MOTORS AMERICA, INC.

G13457421

Courtesy of KIA MOTORS AMERICA, INC.

G13457422

Courtesy of KIA MOTORS AMERICA, INC.

G13457423

Courtesy of KIA MOTORS AMERICA, INC.

G13457424

Courtesy of KIA MOTORS AMERICA, INC.

G13457425

Courtesy of KIA MOTORS AMERICA, INC.

G13457426

Courtesy of KIA MOTORS AMERICA, INC.