Vehicle S/W Management

CAUTION:

* Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC (FCA) ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.

Inspection Condition	Inspection Procedure	Reference
Ignition "ON".	Connect KDS to Data Link Connector (DLC). Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS.	Fig.1 to 4 Fig.5 to 12

G13457210

Courtesy of KIA MOTORS AMERICA, INC.

G13457211

Courtesy of KIA MOTORS AMERICA, INC.

G13457212

Courtesy of KIA MOTORS AMERICA, INC.

G13457213

Courtesy of KIA MOTORS AMERICA, INC.

G13457214

Courtesy of KIA MOTORS AMERICA, INC.

G13457215

Courtesy of KIA MOTORS AMERICA, INC.

G13457216

Courtesy of KIA MOTORS AMERICA, INC.

G13457217

Courtesy of KIA MOTORS AMERICA, INC.

G13457218

Courtesy of KIA MOTORS AMERICA, INC.

G13457219

Courtesy of KIA MOTORS AMERICA, INC.

G13457220

Courtesy of KIA MOTORS AMERICA, INC.

G13457221

Courtesy of KIA MOTORS AMERICA, INC.