LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Forte LXS >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System And Rear Wheel Alignment - Couple Torsion Beam Axle >> Rear Shock Absorber >> Repair Procedures >> Disassembly And Reassembly

Disassembly And Reassembly

  1. Remove the insulator cap (A).
    G13304469Courtesy of KIA MOTORS AMERICA, INC.
  2. Using the SST (09546-3X100), loosen the self locking nut.

    Tightening torque: 

    29.4 N.m (3.0 kgf.m, 21.7 lb.ft)

    G13304470Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Do not reuse the self locking nut.
  3. Remove the insulator (A), bumper rubber (B) and dust cover (C) from the shock absorber (D).
    G13304471Courtesy of KIA MOTORS AMERICA, INC.
  4. Reassembly is the reverse of the disassembly.
scientia non olet · About LEMON Manuals