LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Forte FE, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind-Spot Collision Warning System Diagnosis >> DTC C170D-04: ECU Hardware Error (REAR RIGHT) >> Wiring Inspection >> Circuit Inspection >> Inspection Item: BCW Radar circuit inspection

Inspection Item: BCW Radar circuit inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
BCW Radar (RH) Connector 1 (power) Chassis ground - B+
BCW Radar (LH) Connector 1 (power) Chassis ground - B+
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
BCW Radar (RH) Connector 6 (ground) Chassis ground - Approx. below 1Ω
BCW Radar (LH) Connector 6 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good