LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Forte FE, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind-Spot Collision Warning System Diagnosis >> DTC C1616-88: CAN Bus OFF (C-CAN) >> Wiring Inspection >> Circuit Inspection >> Inspection Item: CAN Resistor Inspection

Inspection Item: CAN Resistor Inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF" and disconnect the battery.
  2. Wait about four minutes.
  3. Disconnect the electrical connector(s) from the concerned component.
BCW Radar (LH) Connector 7 (C-CAN high) BCW Radar (LH) Connector 3 (C-CAN low) Approx. 60Ω

Good 

No Good