Repair Procedures: Removal

1. Move the shift lever to "N" range.
2. Remove the air cleaner assembly.

   (Refer to Engine Mechanical System - "AIR CLEANER ")

3. Remove the battery and battery tray.

   (Refer to Body Electrical System - "BATTERY ")

4. Disconnect the gear actuator motor connector (A).

   Courtesy of KIA MOTORS AMERICA, INC.

5. Remove the wiring mounting clip (B) after disconnecting the gear actuator solenoid connector (A).

   Courtesy of KIA MOTORS AMERICA, INC.

6. Disconnect the gear actuator motor extension connectors (A).

   Courtesy of KIA MOTORS AMERICA, INC.

7. Remove the gear actuator assembly after loosening bolts (A, B).

Tightening torque: 

1. 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)
2. 19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.