DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring speed difference between input speed sensor and calculated input speed based on wheel speed sensor	Faulty DCT Fault 1st gear ratio
Enable Condition	No failure on input speed sensor1, wheel speed sensor and CAN1 during driving in 1st gear
Threshold Value	Input speed sensor1 value - wheel speed sensor value * gear ratio * tire radius greater than maximum (400, 0.15 * wheel speed sensor value * gear ratio * tire radius)
Fail Safe	Drive at even gear
Detecting Time	3 events
MIL ON Condition	2 driving cycles