Vehicle Name Writing

The main contents of diagnostic method using diagnostic device are as follows:

1. Connect self-diagnosis connector (16 pins) located in the lower driver side crash pad to self-diagnostic device, and then turn on the self-diagnostic device after key is ON.
2. Select the "IBU-TPMS" and "Vehicle Name Writing" on KDS vehicle selection screen, then select OK.

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.

The vehicle naming (Read/Write) is automatically typed and just select the vehicle's option in the selection tab below.

* The vehicle naming code is different as the vehicle models

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.