DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring the CAN message (during auto-location, check its sensor's ID)	Faulty the wheel speed sensor HECU C-CAN communication line
Enable Condition	Ignition "ON" Normal battery voltage is 9 to 16V The vehicle speed is greater than 15.5MPH (25km/h) Start the auto learning by re driving, after parks the vehicle for more than 19min
Threshold Value	Fail the auto location
Detecting time	2.5s
Disable Conditions	Success the auto location