| DTC Strategy |
|
- Poor connector connection
- Short or open in C-CAN line
- Short circuit between CAN high and low line
- Faulty control modules that connected to C-CAN
|
| Enable Conditions |
- Ignition "ON"
- Battery voltage 9 to 16V
|
| Threshold Value |
- C-CAN message is not received
|
| Detecting Time |
|
| Warning Lamp |
|
| Symptom |
|
| Fail Safe |
|
| Service Lamp "ON" Condition |
- CAN bus off for more than 0.8s
|
| Service Lamp "OFF" Condition |
- Immediately when CAN bus off condition is removed
|
| Disable Condition |
- Immediately when CAN bus off condition is removed
|