| DTC Strategy |
|
- Poor connector connection
- Connector disconnected
- Open or short in CAN line
- Faulty ECM/PCM
|
| Enable Conditions |
- Ignition "ON"
- Battery voltage 9 to 16V
|
| Threshold Value |
- Abnormal ECM/PCM CAN message
|
| Detecting Time |
|
| Warning Lamp |
|
| Symptom |
|
| Fail Safe |
|
| Service Lamp "ON" Condition |
- When engine status information is not valid from ECM/PCM CAN message for 3sec
|
| Service Lamp "OFF" Condition |
- Immediately, when ECM/PCM CAN message is normally received
|
| Disable Condition |
- Immediately, when ECM/PCM CAN message is normally received
|