| DTC Strategy |
- Monitor steering angle position signal
|
- Poor connection in torque angle sensor
- Faulty angle sensor
- Faulty motor position sensor
- Mechanical fault
|
| Enable Conditions |
|
| Threshold Value |
- Steering angle sensor zero position is not calibrated
- Steering angle sensor zero is wrong calibrated
|
| Detecting Time |
|
| Warning Lamp |
|
| Symptom |
|
| Fail Safe |
- Steering angle sensor signal is not available
|
| Service Lamp "ON" Condition |
- Until next zero calibration is performed
|
| Service Lamp "OFF" Condition |
- Until next zero calibration is performed
|
| Disable Condition |
- After steering angle sensor calibration
|