| DTC Strategy |
- Monitor the power supply unit in ECU
|
- Poor connection in torque angle sensor
- Open or short circuit of toque angle sensor wiring harness
- Faulty steering angle sensor
- MDPS
- Calibration error
|
| Enable Conditions |
|
| Threshold Value |
- If the column is to go over 680°
- If the motor position sensor is abnormal
|
| Warning Lamp |
|
| Symptom |
- Abnormal steering angle sensor output
|
| Fail Safe |
- Steering angle sensor normal output is not possible
|
| Service Lamp "ON" Condition |
- 1 Driving cycle (Start "ON" and Ignition "OFF" 1 time)
|
| Service Lamp "OFF" Condition |
|
| Disable Condition |
|