Circuit Inspection

G13289267

Courtesy of KIA MOTORS AMERICA, INC.

Module Circuit Inspection
Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Ignition "OFF". Disconnect the ALR sensor connector.	ALR sensor connector	1 (ALR+)	Chassis ground	-	∞ (infinity)Ω
	ALR sensor connector	2 (ALR-)	Chassis ground	-	∞ (infinity)Ω
	ALR sensor connector	1 (ALR+)	OCS ECU connector	5 (ALR+)	Approx. below 1Ω
	ALR sensor connector	2 (ALR-)	OCS ECU connector	6 (ALR-)	Approx. below 1Ω

Good

Carefully re-do this troubleshooting guide steps.
If problem still occurs, replace ALR sensor and then go to "Verification of Repair " procedure.

No Good

Repair as necessary and then go to "Verification of Repair " procedure.