LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System Diagnosis >> DTC B1685-88: Engine RPM fault - CAN Signal >> DTC Inspection >> Monitor KDS Data

Monitor KDS Data

Inspection Condition Inspection Procedure Reference
  1. Engine "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor parameters in engine system "Current Data" with KDS.
 Fig. 1
G13284659Courtesy of KIA MOTORS AMERICA, INC.

Good 

  1. Go to "Wiring Inspection " procedure.

No Good 

  1. Check for APT sensor related DTC and perform applicable troubleshooting and then re-do this troubleshooting guide steps.
  2. If APT sensor related DTCs are corrected and the problem still occurs, go to "Wiring Inspection " procedure.
scientia non olet · About LEMON Manuals