DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item		Detecting Condition	Possible Cause
Case1	DTC Strategy	During engine running, check accuracy of time measurement by Engine-off timer micro-com	Poor connection or damaged connector Unstable power Faulty PCM
	Enable Condition	Engine speed is higher than 32RPM Time after engine start for more than 10s Battery voltage is at between 10 and 16V
	Threshold Value	Compare engine-off timer time ratio deviation measurement with timer during engine running condition (Deviation ratio is higher than 35%)
	Diagnostic Time	100s
Case1	DTC Strategy	During engine stop, check engine-off timer start increment
	Enable Condition	Transition ignition "ON" to "OFF" Battery voltage is at between 10 and 16V
	Threshold Value	Compare Engine-off timer time measurement with timer after ignition key off and engine stop (Deviation is higher than 2s)
	Diagnostic Time	4s
MIL ON Condition		2 driving cycles