DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- The BPS rationality diagnostic compares the difference between BPS output and calculated value to a calibration value
|
- Poor connection
- Faulty PCM
|
| DTC Strategy |
Case1 |
- Engine RPM is lower than 32RPM (Engine stopped)
- Barometric pressure is between 400hPa and 1150hPa
- MAP sensor voltage is between 0.2V and 4.8V
|
| Case2 |
- Engine RPM is higher than 32RPM (Engine running)
|
| Threshold Value |
Case1 |
- Deviation between barometric pressure and intake air pressure is higher than 10kPa
|
| Case2 |
- Deviation between actual intake air pressure and model intake air pressure is higher than 20kPa and lower than -20kPa
|
| Diagnostic Time |
|
| MIL ON Condition |
|