Removal And Installation: Resonator
WARNING: This page is about a different variant/trim than selected.
- Remove the front wheel guard.
(Refer to Body (Interior and Exterior) - "FRONT WHEEL GUARD ")
- Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - ENGINE ROOM UNDER COVER ")
- Remove the wiring mounting clips (A).
- Remove the resonator (A).
Tightening torque:
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft, 35.4 - 53.1 lb.in)
- Install in the reverse order of removal.