Circuit Inspection
WARNING: This page is about a different variant/trim than selected.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Knock sensor connector | 2 (signal) | Chassis ground | - | 0V |
| Knock sensor connector | 1 (ground) | Chassis ground | - | 0V | |
|
Knock sensor connector | 2 (signal) | Knock sensor connector | 1 (ground) | ∞ (infinity)Ω |
Good
- Go to "Component Inspection " procedure.
No Good
- Repair open or short in circuit and then go to "Verification of Repair " procedure.