Circuit Inspection
WARNING: This page is about a different variant/trim than selected.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
CKPS connector | 1 (ground) | Chassis ground | - | Approx. 1.87V |
| CKPS connector | 2 (signal) | Chassis ground | - | Approx. 1.88V | |
|
CKPS connector | 1 (ground) | PCM connector | 74 (ground) | Approx. below 1Ω |
| CKPS connector | 2 (signal) | PCM connector | 95 (signal) | Approx. below 1Ω | |
| CKPS connector | 2 (signal) | Chassis ground | - | ∞ (infinity)Ω | |
Good
- Go to "Component Inspection " procedure.
No Good
- Repair or replace as necessary and then go to "Verification of Repair " procedure.