LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Engine Control System Diagnosis - 2.0L (1 Of 6)) >> DTC P0038-00: HO2S Heater Control Circuit High (Bank 1/Sensor 2) >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different variant/trim than selected.
G13291246Courtesy of KIA MOTORS AMERICA, INC.
G13291247Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect HO2S (Bank1, Sensor2) connector.
  3. Ignition "ON".
HO2S (Bank1, Sensor2) connector 3 (power) Chassis ground - Approx. 12V
HO2S (Bank1, Sensor2) connector 4 (heater) Chassis ground - Approx. 2.5V

Good 

  1. Go to "Component Inspection " procedure.

No Good 

  1. Repair open or short in circuit and then go to "Verification of Repair " procedure.