DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Electrical check (short to ground)	Related fuse blown or missing Open or short to ground in power supply or control connector Short to ground in control circuit Poor connection or damaged connector Faulty HO2S
Enable Conditions	Engine speed is higher than 32RPM Battery voltage is higher than 10V and lower than 16V
Threshold Value	ECU power stage diagnosis output voltage is lower than 1.911V
Diagnostic Time	Continuously (5.0s/recurrence 100ms)
MIL ON Condition	2 driving cycles