DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item		Detecting Condition	Possible Cause
DTC Strategy	Case1	PWM range check	Poor connection or damaged connector Faulty ETC motor Faulty TPS
	Case2	Deviation between throttle position and constant setpoint check
	Case3	Deviation between throttle position and moving setpoint
Enable Conditions	Case1	TPS adaptation finished Battery voltage is higher than 10V No relevant error
	Case2	TPS adaptation finished Constant TPS setpoint No relevant error
	Case3	TPS adaptation finished No relevant error
Threshold Value	Case1	Moving mean value of the controller output is higher than 95%
	Case2	Throttle position - Throttle position setpoint is higher than 3°
	Case3	Throttle position - Throttle position setpoint is higher than 25°
Diagnostic Time		0.5s
MIL ON Condition		1 driving cycle