DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item		Detecting Condition	Possible Cause
DTC Strategy		Electrical Check	Short to battery in connector Poor connection or damaged connector
Enable Conditions	Case1	Time after ignition "ON" higher than 0.1s Engine speed is equal 0RPM No main relay error
Enable Conditions	Case2	No relevant failure Battery voltage is lower than 16V Engine speed is at between 600 and 4000RPM Coolant temperature is higher than 73°C (140°F)
Threshold Value	Case1	Alternator load is lower than 15%
Threshold Value	Case2	Alternator load is lower than 2%
Diagnostic Time	Case1	1s
Diagnostic Time	Case2	20s
MIL ON Condition		DTC only (idle stop forbidden)