DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor the turbine speed sensor signal	Poor connector connection Faulty drive speed sensor circuit Faulty drive speed sensor
Enable Condition	Battery voltage is higher than 10V Engine speed higher than 350RPM Lever position in "D" or "Sports" (forward gear) Oil temperature is higher than -10°C (14°F) Drive pulley speed is higher than 600RPM After shift gears (1s)
Threshold Value	The pulse of the speed sensor is 0RPM
Detecting Time	4s
MIL ON Condition	2 driving cycles