Circuit Inspection

WARNING: This page is about a different variant/trim than selected.

G13291928

Courtesy of KIA MOTORS AMERICA, INC.

G13291929

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Disconnect the electrical connector(s) from the concerned component. Ignition "ON".	ATM solenoid valve connector	10 (power)	Chassis ground	-	Approx. 2.5V
	ATM solenoid valve connector	6 (DC)	Chassis ground	-	Approx. 2.9V
Ignition "OFF". Disconnect battery (-) cable. Disconnect the electrical connector(s) from the concerned component.	ATM solenoid valve connector	6 (DC)	Chassis ground	-	∞ (infinity)Ω
	ATM solenoid valve connector	6 (DC)	Chassis ground	5 (VFS_DC)	Approx. below 1Ω

Good

If problem still occurs, go to "Component Inspection " procedure.

No Good

Repair open or short in circuit and then go to "Verification of Repair " procedure.