DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor the signal	Faulty torque converter hydraulic system Faulty torque converter solenoid valve Faulty valve body
Enable Condition	Battery voltage is higher than 10V Engine speed is higher than 350RPM Lever position in "D" or "Sports" (forward gear) Normal CAN Engine torque is higher than 10% Input speed is higher than 0RPM Damper clutch solenoid valve 100%
Threshold Value	Torque converter slip is higher than 100RPM
Fail Safe	Damper clutch "OFF"
Detecting Time	5s
MIL ON Condition	2 driving cycles