DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor the gear ratio	Faulty IVT Faulty PCM
Enable Condition	Battery voltage is more than 10V Engine speed is higher than 350RPM Lever position in "D" or "Sports" (forward gear) Oil temperature is higher than -10°C (14°F) Solenoid "ON" Normal CAN After shift gears (1s) Vehicle speed is higher than 10km/h
Threshold Value	Synchronization error (Absolute value of Input speed - (drive pulley speed * gear ratio) is higher than 200RPM)
Fail Safe	Solenoid power "OFF", limited learning, low engine torque, control the cooling fan
Detecting Time	4s
MIL ON Condition	2 driving cycles