DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor the output speed sensor signal	Poor connector connection Faulty output speed sensor circuit Faulty output speed sensor
Enable Condition	Battery voltage is higher than 10V Engine speed is higher than 350RPM Shift lever position in "D" or "Sports" (Forward gear) Oil temperature sensor is higher than -10°C (14° F) Drive pulley speed is higher than 600RPM After shift gears (1s)
Threshold Value	Output speed is 0RPM
Detecting Time	4s
MIL ON Condition	2 driving cycles