DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Monitor the output speed sensor signal
|
- Poor connector connection
- Faulty output speed sensor circuit
- Faulty output speed sensor
|
| Enable Condition |
- Battery voltage is higher than 10V
- Engine speed is higher than 350RPM
- Vehicle speed is higher than 50km/h (31mph)
- Shift lever position in "D" or "Sports" (Forward gear)
- Oil temperature is higher than -10°C
|
| Threshold Value |
- Vehicle speed equivalent to output speed is less then vehicle speed * 0.3 or higher than vehicle speed * 1.7 (ex. Less than 15km/h (9mph) or higher than 85km/h (53mph) when vehicle speed is 50km/h (31mph))
|
| Detecting Time |
|
| MIL ON Condition |
|