LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Cylinder Block - 2.0L) >> Rear Oil Seal >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new rear oil seal.
    1. Apply engine oil on the edge of new oil seal.
    2. Using SST (09231-H1100, 09214-2E000) and a hammer, tap in the oil seal (A) until the SST face is aligned with the cylinder block assembly rear face.
    G13283330Courtesy of KIA MOTORS AMERICA, INC.
  2. Install the other parts reverse order of removal.
scientia non olet · About LEMON Manuals